What Are the Requirements for the Selection of Lubricants for Roller Chains?
For their excellent characteristics such as accurate power transmission, stable transmission, and convenient maintenance, roller chains are widely used in all walks of life. Especially in today's highly automated production equipment, roller chains have become an indispensable transmission component of mechanical transmission.
A good lubrication of the roller chain can greatly reduce the wear of the chain and extend its service life. Roller chains have the following requirements for the selection of lubricants.
1. Excellent permeability
Since the gap between the roller chain shaft and the sleeve is very small, it belongs to an open environment. At this time, the lubricant is required to have good permeability. If the lubricating oil does not have good permeability, it cannot penetrate into the shaft and sleeve, nor can it lubricate the shaft and sleeve.
2. Good adhesion
When the chain is running, the chain oil will be thrown out due to the effect of high speed. At low speeds, the chain oil drops due to gravity, which will not only pollute the products and the environment but also cause a lot of waste. Therefore, the lubricating oil must have good adhesion, be able to adhere firmly to the friction surface, and will not fall off due to various influences.
3. Excellent lubricity
Because of the different functions of the running chain, the requirements for lubrication performance are also different. Especially roller chains under heavy load and impact conditions need better anti-extrusion and wear resistance, so the lubricating oil is required to have excellent Lubricity to protect the roller chain from wear.
4. Good oxidation stability
The chain drive usually works in a bare environment, so the chain lubricant should have good oxidation stability to prevent the roller chain from being oxidized and corroded and affecting performance.
In addition to the above basic requirements, the roller chain has some additional requirements for lubricating oil. These requirements will be selected according to the operating environment of the transmission chain and equipment requirements. If you want to know more about roller chains after reading the above, you can get a comprehensive solution by contacting us.
As a professional quality chain manufacturer, we have accumulated many years of manufacturing experience in this field. We have a strong R&D department and professional quality management team, which can provide you with safe and high-quality products. We can also provide corresponding customized services and effective solutions according to your needs. If you want to buy our roller chain, please contact us immediately!